|
The Motorola 6809 ("''sixty-eight-oh-nine''") is an 8-bit (with some 16-bit features) microprocessor CPU from Motorola, designed by Terry Ritter and Joel Boney and introduced in 1978. It was a major advance over both its predecessor, the Motorola 6800, and the related MOS Technology 6502. ==Description== Among the significant enhancements introduced in the 6809 were the use of two 8-bit accumulators (A and B, which could be combined into a single 16-bit register, D), two 16-bit index registers (X, Y) and two 16-bit stack pointers. The index and stack registers allowed advanced addressing modes. Program counter relative addressing allowed for the easy creation of position-independent code, while a user stack pointer (U) facilitated the creation of reentrant code. The 6809 was the first microprocessor able to use fully position-independent code without the use of programming tricks. The 6809 was source-compatible with the 6800, though the 6800 had 78 instructions to the 6809's 59. Some instructions were replaced by more general ones which the assembler translated into equivalent operations and some were even replaced by addressing modes. The instruction set and register complement were highly orthogonal, making the 6809 easier to program than the 6800 or 6502. Other features were one of the first hardware-implementations of a multiplication instruction in an MPU, full 16-bit arithmetic, and an especially fast interrupt system. Like the 6800, it included an undocumented address bus test instruction with the nickname Halt and Catch Fire (HCF)〔https://student.brighton.ac.uk/burks/pcinfo/hardware/cpu.htm〕 The 6809's state machine and control logic, unlike many processors of the day, was mostly implemented using a large PLA and asynchronous random logic (a trait of early designs and, partly, of RISC) rather than microcoded. The 6809 used the two-phase clock cycle directly as the basic machine cycle. Although this means fewer clock cycles per instruction, compared to the Z80 for instance, the latter's higher resolution state machine allowed clock frequencies 3-5 times as high without demanding faster memory chips, which was often the limiting factor. This is because the Z80 combines two full (but short) clock cycles into a ''relatively'' long memory access period compared to the clock, while the more asynchronous 6809 instead has ''relatively'' short memory access times: depending on version and speed grade, approximately 60% of a single clock cycle was typically available for memory access in a 6809 (see data sheets). The 6809 had an internal two-phase clock generator (needing only an external crystal) whereas the 6809E needed an external clock generator. There were also variants such as the 68A09(E) and 68B09(E); the internal letter indicates the processor's rated clock speed. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Motorola 6809」の詳細全文を読む スポンサード リンク
|